首頁 > 評測 > 傾”芯”,不恨晚——NUCLEO-F446RE評測
傾”芯”,不恨晚——NUCLEO-F446RE評測
- [導讀]
- F446RE作為一顆市用度很高的芯,還需要來評測嗎?市面上已經有了Nucleo-F446ZE,那Nucleo-F446RE是不是就落伍了?本文作者并不這么看,傾“芯”,不恨晚~通過本文中的跑分、功耗和精度等測試,你或許會對它有更加深刻地認識。
(2)功耗測試
功耗測試是不可或缺的測試,現在的MCU都要強調低功耗。
- Sleep Mode
運行狀態:
- System Running at PLL (180MHz)
- Flash 5 wait state
- Instruction and Data caches ON
- Prefetch OFF
- Code running from Internal FLASH
- All peripherals disabled
- Wakeup using EXTI Line (User Button PC.13)
實測數據跟官方的差幾個毫安,有點偏差。
- STOP Mode
運行狀態:
- RTC Clocked by LSI
- Regulator in LP mode
- HSI, HSE OFF and LSI if not used as RTC Clock source
- No IWDG
- FLASH in deep power down mode
- Automatic Wakeup using RTC clocked by LSI (after ~20s)
這個模式下測到的數據跟官方的有點差距了。
- Under Drive STOP Mode
運行狀態:
- RTC Clocked by LSI
- Regulator in LP mode
- Under drive feature enabled
- HSI, HSE OFF and LSI if not used as RTC Clock source
- No IWDG
- FLASH in deep power down mode
- Automatic Wakeup using RTC clocked by LSI (after ~20s)
同樣這組數據差距也比較大。
- STANDBY Mode
運行狀態:
- Backup SRAM and RTC OFF
- IWDG and LSI OFF
- Wakeup using WakeUp Pin (PA.00) by connecting PA0 (pin 28 in CN7 connector) to 3.3V (pin 4 in CN6 connector)
測量的結果跟官方標稱的相差不大。
- STANDBY Mode with RTC clocked by LSI
運行狀態:
- RTC Clocked by LSI
- IWDG OFF and LSI OFF if not used as RTC Clock source
- Backup SRAM OFF
- Automatic Wakeup using RTC clocked by LSI (after ~20s)
測試結果也差不多,跟官方的相差不會太大。
-STANDBY Mode with RTC clocked by LSI and BKPSRAM
運行狀態:
- RTC Clocked by LSI
- Backup SRAM ON
- IWDG OFF
- 本文系21ic原創,未經許可禁止轉載!
網友評論
- 聯系人:巧克力娃娃
- 郵箱:board@21ic.com
- 我要投稿
-
歡迎入駐,開放投稿
- NRF52810藍牙數字耳機找人定制
預算:¥30005天前
- 125KW模塊式PCS軟硬件外包開發
預算:¥1100000015小時前
- 12V汽車啟動電源項目BMS設計
預算:¥50000023小時前
- 數據可視化軟件 開發
預算:¥5000023小時前
- PLC項目調試修改
預算:¥100001天前
- 起動電機控制器開發
預算:¥1100001天前