C++test在對Tornado 2.2-VxWorks-5.5 simulator 下針對C++代碼單元測試

使用C++test在Tornado 2.2-VxWorks-5.5 simulator 下針對CPP代碼做單元測試時，出現不能獲取測試結果的問題，反復偵測問題的緣由，查看幫助文檔，終于在幫助文檔中找到如下一些說明：

“The default build of VxWorks-5.5 simulator (%WIND_BASE%targetconfigsimpcvxWorks.exe; Tornado-2.2) doesn't contain enough C++ features to satisfy C++test's C++ instrumentation needs in its default mode. Thus, to test C++ code, you either need to build your own VxSim image with scaled-up C++ support (we recommend using all C++ features except complex numbers; at minimum) or you need to add the -DCPPTEST_SPECIAL_STD_EXCEPTIONS_HANDLING_ENABLED=0 definition to the project compilation flags. This issue does not affect VxWorks-5.4 (Tornado-2.0).”

幫助文檔中說得很清楚，VxWorks5.5默認的simulator缺少C++特性支持，所以解決方案就是重新構建一個支持C++特性的image，重新執行即可。