LCD1602程序設計4線并口通信源程序

LCD1602采用4線并口通信,連接方式是DB4－DB7接P1.4-P1.7;RS:P2.7;RW:P2.6
EN:P2.5;注意初始化的設置。
在萬利MedWin 3.0開發環境上調試通過！

#include
/********************************************************************/
#define LCDIO P1

sbit LCD1602_RS=P2^7;

sbit LCD1602_RW=P2^6;

sbit LCD1602_EN=P2^5;

/********************************************************************/
void LCD_delay(void);

void LCD_en_command(unsigned char command);

void LCD_en_dat(unsigned char temp);

void LCD_set_xy( unsigned char x, unsigned char y );

void LCD_write_char( unsigned x,unsigned char y,unsigned char dat);

void LCD_write_string(unsigned char X,unsigned char Y,unsigned char *s);

void LCD_init(void);

/********************************************************************/

void delay_nms(unsigned int n);

/********************************************************************/
void main(void)
{
LCD_init();
while(1 )
{
LCD_en_command(0x01);

delay_nms(2);
LCD_write_string(0,0," create by ");
LCD_write_string(0,1," fenyman ");

delay_nms(200);

LCD_en_command(0x01);

delay_nms(2);
LCD_write_string(0,0," LCD1602 ");
LCD_write_string(0,1," test ");

delay_nms(200);
}
}
/******************** LCD PART *************************************/
void LCD_delay(void)
{
unsigned char i;
for(i=40;i>0;i--)
;
}
/********************************************************************/
void LCD_en_command(unsigned char command)
{

LCD1602_RS=0;
LCD1602_RW=0;
LCD1602_EN=0;
LCDIO=(command & 0xf0);

LCD1602_EN=1;
LCD_delay();

LCD1602_EN=0;

LCDIO=(command & 0x0f)<<4;
LCD1602_EN=1;
LCD_delay();
LCD1602_EN=0;
}
/********************************************************************/
void LCD_en_dat(unsigned char dat)
{

LCD1602_RS=1;
LCD1602_RW=0;
LCD1602_EN=0;
LCDIO=(dat & 0xf0);

LCD1602_EN=1;
LCD_delay();
LCD1602_EN=0;

LCDIO=(dat & 0x0f)<<4;
LCD1602_EN=1;

LCD_delay();
LCD1602_EN=0;
}
/********************************************************************/
void LCD_set_xy( unsigned char x, unsigned char y )
{
unsigned char address;
if (y ==0)
address = 0x80 + x;
else
address = 0xC0 + x;
LCD_en_command(address);
}
/********************************************************************/
void LCD_write_char( unsigned x,unsigned char y,unsigned char dat)
{
LCD_set_xy( x, y );
LCD_en_dat(dat);
}
/********************************************************************/
void LCD_write_string(unsigned char X,unsigned char Y,unsigned char *s)
{
LCD_set_xy( X, Y ); //set address
while (*s) // write character
{
LCDIO=*s;
LCD_en_dat(*s);
s ++;
}
}
/********************************************************************/
void LCD_init(void)
{
LCD_en_command(0x01);
delay_nms(5);
LCD_en_command(0x01);
delay_nms(5);
LCD_en_command(0x28);
delay_nms(5);
LCD_en_command(0x28);
delay_nms(5);
LCD_en_command(0x28);
delay_nms(5);
LCD_en_command(0x0C);
delay_nms(5);
LCD_en_command(0x80);
delay_nms(5);
LCD_en_command(0x01);
delay_nms(5);
}
/********************************* *********************************/
void delay_nms(unsigned int n)
{
unsigned int i=0,j=0;
for (i=n;i>0;i--)
for (j=0;j<1140;j++);
}
/********************************************************************/