ATMega8 中斷方式UART測試程序

#include
#include
#include

#define uchar unsigned char
#define uint unsigned int

uchar g_bTxdPos=0; //發送定位計數器

uchar g_bTxdLen=0; //等待發送字節數
uchar g_bRxdPos=0; //接收定位計數器
uchar g_bRxdLen=0; //等待接收字節數

uchar g_aSendBuf[16]; //發送數據綬沖區
uchar g_aRecvBuf[16]; //接收數據緩沖區

//接收中斷
SIGNAL(SIG_UART_RECV)
{
uchar c=UDR;
if(g_bRxdLen>0)
{
g_aRecvBuf[g_bRxdPos++]=c;
g_bRxdLen--;
}
}

//發送中斷
SIGNAL (SIG_UART_TRANS)
{
if(--g_bTxdLen>0)
UDR=g_aSendBuf[++g_bTxdPos];
}

//是否接收完成
uchar IsRecvComplete(void)
{
return g_bRxdLen==0;
}

//從發送緩沖區發送指定長度數據
void SendToUart(uchar size)
{
g_bTxdPos=0;
g_bTxdLen=size;
UDR=g_aSendBuf[0];
while(g_bTxdLen>0);
}

//接收指定長度數據到接收緩沖區
void RecvFromUart(uchar size,uchar bwait)
{
g_bRxdPos=0;
g_bRxdLen=size;
if(bwait)
while(g_bRxdLen>0);
}

int main( void )
{
uchar i;

//uart初始化
//接收使能、發送使能、接收中斷允許、發送中斷允許
UCSRB=(1< UBRRL=25; // baud=9600 UBRR=CK/(baud*16) -1

sei();//總中斷允許

while(1)
{
//異步接收16字節數據
RecvFromUart(16,0);

//等待接收完成
while(!IsRecvComplete());

//將接收到的數據復制到發送緩沖區
for(i=0;i<16;i++)
g_aSendBuf=g_aRecvBuf;

//發送回接收到的數據
SendToUart(16);
}
}